Caravan Winder Drill Extension Socket 19mm (300mm)

The caravan winder drill extension socket is suitable for bolts and nuts of 19mm, and the extension length is 300mm. This 19mm extension socket is made from strong yellow steel and suitable for use with 240V and battery powered drills. Ideal for caravan, camper trailer, and can be used on corner steady legs and the Levellers to stabilise, raise, or lower a vehicle

Description:

• Socket size 19mm
• Extended length 300mm
• Heavy duty
• 1 Year Warranty

A caravan corner steady extension socket is a device used to provide additional length and reach to the corner steadies of a caravan or trailer. Corner steadies are retractable legs located at each corner of a caravan or trailer, designed to stabilize and level the vehicle when it is parked.
The extension socket is typically a metal tube or rod with a square or hexagonal socket at one end and a handle or attachment point at the other end. It allows you to extend the reach of the corner steady winding mechanism, making it easier to operate and adjust the corner steadies.

Here’s a general guide on how to use a caravan corner steady extension socket:
1. Park your caravan or trailer in a suitable location and ensure it is on a relatively level surface.
2. Locate the corner steadies at each corner of the caravan or trailer. These are usually retractable legs attached to the chassis near the wheels.
3. Attach the extension socket to the winding mechanism of one of the corner steadies. The socket end of the extension should fit onto the square or hexagonal protrusion on the corner steady.
4. Insert the extension socket firmly onto the winding mechanism, ensuring it is securely attached.
5. Hold onto the handle or attachment point of the extension socket and begin turning it in the appropriate direction (either clockwise or counterclockwise) to raise or lower the corner steady.
6. Continue rotating the extension socket until the corner steady reaches the desired height or until it makes solid contact with the ground, providing stability and leveling to the caravan or trailer.
7. Repeat the process for the remaining corner steadies, using the extension socket as needed.
8. Once all corner steadies are properly adjusted and stabilized, double-check their tightness and make any necessary adjustments to ensure the vehicle is level and secure.

It’s important to note that the specific instructions may vary depending on the design of your corner steadies and extension socket. Always refer to the manufacturer’s instructions and guidelines for your particular caravan or trailer to ensure proper usage and safety.